Features:

• Remoldable trays made from plastic that can be heated for quick oral adjustments
• Designed with your comfort in mind for a good night’s sleep
• The device allows for freedom of movement by not having additional cable attachments etc., unlike other sleep apnea therapy devices
• Helps to reduce or alleviate snoring and mild to moderate obstructive sleep apnea
• Due to the mold design, this device offers a precision-fit for ultimate comfort

Benefits: 

• This product has been FDA cleared
• Easy to fit (in as little time as 15 minutes) and can provide effective, immediate relief
• Can be used over again as materials used in the device, can be reheated for an optimal fit and comfort
• Saves time by not requiring a dental appointment for fitting
• Portable and easy to store and take on your travels. The perfect solution for therapy on the go.

Ideal For:

• Those who suffer from excessive snoring
• People who have mild to moderate OBS (Obstructive Sleep Apnea)
• Looking for a cost effective solution to assist with sleep problems

• 1x myTAP oral appliance
• 1x Adjustment dial
• 1x AM repositioner/aligner
• 1x Storage Container
• 1x myTAP User Guide and Patient instructions

Q: What exactly is myTAP?

A: The myTAP is a low cost, temporary treatment for snoring and sleep apnea that is based on the the TAP™ oral appliance, which has been clinically proven in over 40 independent peer reviewed studies to treat snoring, Obstructive Sleep Apnea (OSA), and in some cases severe sleep apnea. The myTAP works by advancing and stabilizing the lower jaw so that the soft tissues of the throat and tongue do not collapse into the airway.

The myTAP trays are made from an innovative plastic that, when heated, becomes soft and can be accurately molded to the teeth at the time of fitting. The trays are thin and low profile, and if reheated, they will return to their original shape. This means that the myTAP can be refitted as many times as needed in order to achieve the perfect fit. The all-plastic adjustment hardware allows the patient to be in control of the treatment position by adjusting how far forward the lower jaw is advanced.

Q: Do I need a prescription to purchase the myTAP Oral Appliance?

A: Yes, a valid oral prescription is required to purchase the myTAP Oral Appliance. We have included a downloadable, printable Rx form to take to your doctor or dentist.

Q: What are the possible side effects associated with the use of myTAP?

A: The possible side effects include

• Slight tooth or gingival discomfort due to pressure of the appliance (if not properly molded). This can include possible movement of the teeth.
• Excessive salivation initially when getting used to the device. This should improve as the patient becomes more familiar and used  to wearing the myTAP regularly.
• In the beginning, you may experience slight jaw soreness or tightness while achieving the perfect fit. This may also include pain in the jaw joint.
• The user may experience a temporary bite change but this will subside approximately 30 minutes after the myTAP is taken out of the mouth in the morning. In some cases, this may also result in a Permanent bite change, and in this instance, please consult with your dentist.
• Gagging and claustrophobia  This will improve as the patient becomes accustomed to wearing the myTAP.

Q: What is the AM Aligner?

A: The AM Aligner (which stands for Adjustment Mechanism Aligner) is a morning repositioner that comes with every myTAP Oral Appliance. The purpose of the AM Aligner is to reposition the patient’s jaw after each use of the myTAP. It is made of a unique thermoplastic material and is used to take a registration of the patient’s normal, comfortable occlusion before the patient begins to use the myTAP. When fitting the AM Aligner, be sure the patient bites hard enough to cause translucency in contact areas when the Aligner is held up to a light. Mandibular protrusion can move jaws forward permanently over a period of time if the patient doesn’t make sure that normal occlusion is reestablished each day.

Q: How does the AM Aligner work?

A: When the patient wakes up in the morning, their jaw will have been in an unnatural position all night so the bite will be off. The front teeth may hit together excessively and the back teeth may not hit at all. It is important for the patient to understand that this may become a permanent issue and getting their teeth back into proper occlusion is the patient’s responsibility. The AM Aligner is for getting the jaw back to the proper position, and is used each morning after removal of the myTAP.

Q: How do I use the AM Aligner?

A: When the myTAP is removed in the morning, first stretch your jaw aggressively. There may be pops and snaps from the jaw repositioning itself. After this exercise, the muscles will have relaxed somewhat and the jaw will begin to settle and normalize.

The AM Aligner should be then placed in the mouth for at least 15 to 30 minutes after the myTAP has been taken out. You should place the AM Aligner in your mouth and bite into it, flexing the jaw a few times. This will force the jaw back, which may be uncomfortable if tried too soon after myTAP removal. As you wear the device, you will feel the muscles relaxing and very soon will notice that there is no stress in the jaw, with the teeth back in a comfortable, proper position. Some patients wear the AM Aligner while taking a shower or driving to work or reading emails. It is left to the discretion of the patient as to how long the aligner is worn and how often it is used. It is different for every patient. Some patients will find that they have no need for the aligner after a few weeks of wearing it because the muscles have learned to reposition the jaw on their own. If this is the case, the patient should keep the AM Aligner and check their bite periodically for as long as they are using the myTAP.

Q: What is the Mouth Shield?

A: The Mouth Shield comes with every myTAP appliance and is specifically designed for use with patients using oral appliance therapy who may complain of dry mouth or excess saliva. The myTAP Mouth Shield is designed to alleviate these side effects by sealing the mouth, which in turn provides greater comfort. While comfort is the primary goal, a secondary benefit to sealing the mouth is the promotion of nasal breathing. Thorough research has shown that this is the best natural way to breathe, which also ensures optimal results during treatment.

Q: What are Vertical Shims?

A: The myTAP Oral Appliance is available with three vertical shims that allow an additional 6*mm, 9*mm, and 12*mm (*approximate) vertical opening options. In the studies by both Hoekema and the Army, the “size of the box” of the oral cavity correlated to successful outcomes. Further studies have shown that the size of the tongue is dependent on weight, and it affects the severity of OSA. To compensate for tongue size, a larger vertical opening is necessary.

Benefits of the vertical shims are:

• Combining vertical, incremental titration with protrusion fine tunes treatment position
• Provides more tongue space to positively impact treatment
• May reduce excessive protrusion
• Provides long term guidance for custom oral appliance therapy With these accessories, the myTAP is able to provide a wide range of vertical adjustment in order to effectively treat more patients.